Beach House Watermakers - Frequently Asked Questions (FAQs)
Water consumption depends on the number of occupants, use of the property and the way the water is consumed. If you currently have any water supply system, you should keep a record of the average water usage as a reference. Keep in mind that once a reliable source of fresh water is available, your water consumption will increase.
If you know your daily water demand, simply divide the amount needed by the hours of power supply available each day or the time you want to run your desalination system each day. The result is the GPH (gallon per hour) rating of the watermaker that best suits your application, e.g., 900 gallons / 3400 liters per day consumption at 6 hours running time requires a watermaker with a capacity of 150 gallons / 568 liters per hour.
On first sight, the possibility to replace costly and troublesome water deliveries and/or avoiding rationing water consumption with “water on command” supplied from your own desalination system may appear economical but challenging for technical novices.
In reality, installing and using a desalinator is as easy as owning a washing machine. All Echotec BHL Series desalination systems are engineered for self-installation and shipped ready for connection to the power supply, feed water pipe, brine return and fresh water line to your storage tank. For a successful installation, simply follow the few steps provided in the comprehensive ECHOTec owner’s manual and read through the information provided on this site.
If you have questions, not answered on this site, email to firstname.lastname@example.org or speak directly to a desalination specialist: (no voice mail, no telephone menus) +1 868 634 20 27 or +1 868 634 20 15, 8:00 – 16:30 North American Eastern Standard Time.
If you prefer to get a turnkey installation, we are happy to provide a complete solution from the layout to commissioning your desalination system.
ECHOTec semi-modular desalination systems consume about 2.1 kW for a production of 60 gallons / 227 liters of fresh water per hour. If a generator or inverter is used as the sole power supply or backup, you will need to size it depending on the rating applied at 4.5 to 6 kW to start the system. Once the system runs, you will have ample power available for other equipment or appliances. The system 400 and 700-BHL-1 draws only 1.1 kW at the same power efficiency.
The vertical framed ECHOTec BHL series produces, depending on the model from 38 gallons / 143 liters to 75 gallons / 284 liters per hour and consumes 2.5 kW. The System 3600-DUAL-8 requires 4.6 kW and produces 150 gallons / 568 liters per hour.
All ECHOTec BHL series desalination systems with productions above 1800 GPD are available with optional energy recovery pumps. They can reduce the total power consumption by up to 40%. At an additional equipment cost of approximately 80%, this option may not be feasible where fuel or electricity is available at low cost.
When comparing operating cost, the additional power demand for the essentially higher raw water feed pressure, required for desalination systems equipped with recovery devices needs to be taken in consideration (recovery systems with rotary piston pumps require up to three times the feed pressure needed for conventional plunger pump systems).
The use of energy recovery devices demands finer and therefore more costly pre-filtration to 1 micron compared to 5-10 micron for conventional systems.
Desalination systems with energy recovery devices require electronic control circuits and therefore their use in remote locations without or limited access to factory trained service technicians should be carefully considered.
Feed water supply is available from seawater (beach) wells and open ocean intakes depending on local regulations, geological conditions and budget.
The horizontal or vertical beach well is the preferred source of feed water as severe weather conditions are less likely to challenge the intake system. The feed water from a well is naturally pre-filtered and “good bacteria” in the sand layers can do their work to further enhance the raw water quality. Where available, a local well drilling company should be consulted to evaluate the feasibility of a seawater well.
However, most domestic or small commercial seawater desalination systems are supplied with raw water from open seawater intakes. Ideally, the desalination system and its feed pump should be located as close and low as possible to the coast line and seawater level. In many cases a centrifugal pump, installed above sea level in combination with a priming reservoir is used to feed the RO system. This allows for easy maintenance of the feed pump and prevents corrosion as the pump can be installed “dry and high”.
Where possible, a removable intake pipe with attached sea strainer should be constructed to allow easy access for the removal of marine growth.
Other than this, there are various possibilities to pump raw water to the pre-filters of the desalination system, all adapted to the conditions of the specific shoreline. You can contact your ECHOTec dealer or email@example.com to discuss your intake options.
Sand filters or multi-media filters, installed after the feed pump and before the 20 Micron cartridge filter, can be used to prolong pre-filter life and maintenance effort and therefore reduce the filtration cost of a desalination system.
Systems with open seawater intake benefit the most while the water from a sea well, depending on its grade of natural filtration through the sand bed may not require a media filter.
In a conventional sand filter, lighter and finer sand particles are found at the top of the filter bed, and coarser, heavier sand particles remain at the bottom after backwashing. Filtration takes place in the top few inches of the filter bed only.
As the sand or multi-media bed has to be lifted and tumbled for back washing, a fast upwards flow is needed. If the systems feed pump shall be used for the backwash, the diameter or the filter is limited which results in a relatively small diameter of the filtration surface unless an additional larger seawater pump is installed solely for the backwash.
Advanced filter media like Micro-Z, a granular zeolite outperforms conventional media or multimedia materials due to its unique structure, allowing particles to penetrate deeply into the filter bed to provide superior filtration at increased flow rates.
The very low minimum back wash flow requirement of 12-16 GPM/sq. ft., similar to the service flow rate makes this media an ideal, and cost efficient alternative to the multi-media filter as the RO systems feed pump can also be used for backwashing. Standard pool sand filter housings with all plastic valve heads are suitable for the use with Micro-Z in most applications, provided that the filters diameter suites the particular flow requirement of the desalination system
Yes. The systems 1800-BHL-4 and 700-BHL-2 are ideally suited to be powered by wind and solar energy. They are available in 115/230V AC to be powered with DC to AC inverters or on special order as 24, 36, 48, 90 or 180 V DC versions.
ECHOTec ECO Series desalination systems with a productions of 2400 GPD are available with energy recovery pumps. They can reduce the total power consumption by up to 40%. This option may not be feasible where fuel or electricity is available at low cost.
Also to be considered:
1) Due to continuously decreasing production cost for solar cells, the installation of additional photovoltaic modules in combination with conventional desalination systems must be evaluated.
2) The use of energy recovery devices demands finer and therefore more costly pre-filtration to 1 micron compared to 5-10 micron for conventional systems.
3) Desalination systems with energy recovery devices require electronic control circuits.
4) Desalination systems with energy recovery devices require complicated electronic control circuits and therefore their use in remote locations without or limited access to factory trained service technician should be carefully considered.
Yes, on special order engine powered desalination systems are available. This is an interesting option for larger desalination plants as the engine can be used directly to power the high pressure pump without the loss of converting engine revolution to electrical energy and back to pump revolution.
However, most small and medium sized desalination systems in remote locations are powered by generators. This provides AC power for the systems sea water feed pump and other appliances or equipment. In case of an engine failure or during scheduled maintenance a backup generator can be used.
The product water is pressurized and will flow to a tank above the desalination system.
The back pressure in the product line will reduce the differential pressure needed for the RO process and slightly decreases the output. This should be unnoticed if the tank’s elevation does not exceed about 15m/45’.
To avoid back pressure when the system is not running, you should install a non-return valve in the product line, close to the outlet.
The fresh water flush is a standard feature on all ECHOTec desalination systems. It exchanges the seawater in the membrane element/s with non-chlorinated fresh water. The simple flushing procedure avoids biological growth due to dying micro organisms contained in the seawater and dissolves mineral build up that may clog the membrane element/s. Repeated every 10 days the fresh water flush also avoids the need for chemical preservation, otherwise to be performed for long-term storage.
he fresh water flush is a useful feature. It exchanges the sea water in your membrane element/s with fresh water and therefore avoids biological growth that will clog the membrane, leading to reduced output and premature failure of the membrane element/s. Repeated every 10 days, it avoids the need for chemical preservation, usually performed for long-term storage.
The main advantage of the automatic fresh water flush is that it will repeat the flush during your absence, often at a user selectable interval. However, if you leave your property unattended for a long period of time, you may want to turn off the main power. Now, the automatic fresh water flush will not work as it relies on AC power. In addition, you would need to leave your fresh water plumbing under pressure – not a good idea when your House is unattended for a long time.
The automatic fresh water flush saves the work of turning the systems manual fresh water flush valve after every use versus automatic actuation of the flush valve (when the operator manually shuts off the watermaker) for the price of additional cost and the presence of electronic circuits and electro-magnetic shut-off valves, all prone to fail at some point in time.
For your peace of mind, perform the easy chemical preservation procedure if you leave your property for more than 10 days. The widely available preservative Sodium metabisulfite “pickles” your system for up to 12 months. All ECHOTec systems are supplied with enough preservative for three long term storages.
Yes, the ECHOTec BHL Series allows you to regulate the operating pressure in order to process any feed water from wells with changing salinity to seawater in the Red Sea.
The fresh water output of most desalination systems is rated at a seawater feed temperature of 26˚Celsius or 78˚ Fahrenheit. Membrane productivity, however, is sensitive to changes in feedwater temperature. As water temperature changes, water flux changes almost linearly, due primarily to the diffusion rate of water through the RO membrane.
As a rule of thumb, membrane capacity changes about 2% per degree Celsius water temperature. At very low feed temperatures, pre-heating of the feedwater may be considered. A commonly used method of pre-heating is mixing part of the engines/generators seawater cooling return with the cold seawater, ideally to a temperature of 30˚ Celsius or 86˚ Fahrenheit.
An important consideration in the choice of the right desalination system is the amount of airborne noise transmitted by the high pressure pump.
Rotary piston pumps run at very high speeds and create a loud pitching noise. Even so more advanced systems with rotary piston pumps have full sound enclosures, they are not suitable for installations close to inhabited buildings.
Plunger or piston pumps are considerable less noisy and create lower frequencies as they run at low RPM. The ECHOTec triplex plunger pumps are the quietest high pressure pumps in the world. They are about 10 dB quieter than other brands on the market.
Other than most competitor brands, ECHOTec watermakers do not require proprietary consumables.
All pre-filter housings and pressure vessels are built to standard sizes in order to allow replacement with widely available spare elements to meet the given system specifications.
Slogans like: “consumables are manufactured exclusively to more demanding requirements and higher specifications”
may indicate that this manufacturer’s product requires the purchase of proprietary spares and consumables at drastically elevated prices, only to meet the given system specifications.
The pH buffer/hardener post treatment system is developed by ECHOTec and replacement cartridges are presently not available anywhere else.
All ECHOTec spares and consumables are also available for same day shipping from firstname.lastname@example.org.
Yes. The pre-filter elements can be cleaned several times before you have to replace them.
You should use only pleated polyester pre-filter elements at the micron rating specified in the owner’s manual. String wound or fiber type filter elements cannot be cleaned, have a ten times lower dirt-holding capacity and therefore are not cost efficient. Household under-the-sink filter elements are made from the wrong material; they will fall apart in seawater which will cause fouling and damage to the membrane elements.
When there is the risk of getting oil into the RO system, an oil-water separator (oil absorbing filter) can be installed in the intake line. These filters are quite expensive to exchange, often proprietary and should only be considered when absolutely needed. Remember, oil floats on water and will hardly enter the submerged intake unless feed water is drawn from turbulent water close to a contaminated surface.
Non-proprietary oil-water separators in a multitude of flow requirements are available as optional equipment if needed.
With proper maintenance, the life expectancy is more than 20 years.
If freezing temperatures are expected, you need to protect your watermaker by adding food grade Propylene Glycol to the biocide (storage solution). Both products are infused via the systems service valve.
Provided the membrane element is in good condition, it “filters” to about 0.0005 micron. Virus (0.01 to 0.04 micron) or bacteria (0.1 to 15 micron) will not pass and in reality, waterborne diseases on board vessels using only desalinated water are un-heard of.
However, the condition of the vessels storage tank(s) and/or plumbing can be a concern and should be sterilized e.g.:
with chlorine on commissioning of the desalination system and as an occasional routine maintenance. The desalination system should not be operated in chemically contaminated waters, as the RO process will not safely remove all chemicals.
Active carbon filters after the tank and before the faucet are useful to remove chlorine from shore water but do not improve the watermaker product quality.
Another important consideration is the TDS level (the combined content of all inorganic and organic substances) in the product water. Depending on agency and location, the upper limit for safe drinking water is set to 500 - 1000 ppmTDS.
Drinking Water Regulations
Product water from any RO watermaker is extremely pure, has little salt content, is very soft and acidic due to the removal of alkaline mineral constituents of the seawater. Therefore, similar to rainwater, using RO product requires significantly more fresh water to rinse off soap, shampoo and other detergents.
ECHOTec is the first watermaker manufacturer to combat this problem by improving the RO product quality with a standard supplied post treatment system. The newly developed mineral dispenser returns some hardness to the water and offers a practical, low maintenance solution that saves up to 50% fresh water.
The ECHOTec post treatment element also contains a mixture of minerals that returns bicarbonate alkalinity, correcting pH only enough to reach a neutral equilibrium. This dramatically reduces corrosion on metal tanks, boilers, washing machines and plumbing due to acidic product water.
As the water is slightly re-mineralized, this will also improve the taste of the product water.
While many manufacturers are satisfied by simply assembling standard off-the-shelf parts, ECHOTec engineers and builds more proprietary components than most watermaker companies in order to achieve ultimate reliability, performance and cost efficient operation. What makes ECHOTec the practical choice for cruisers as well as commercial users is that all innovative system components are build to allow the use of widely available off-the-shelf consumables and spares.
The following is a list of proprietary system components especially designed to eliminate problems associated with the operation and maintenance of common on-shore desalination systems.
1) Spring loaded automatic pressure regulators with single O-ring seal for constant flow and superior reliability vs. needle valves with packing.
2) ECHOTec pleated polyester filter cartridges have an effective filtration surface of 6 sq. ft. per 2½” x 9¾" element. They can filter 3 times more seawater than cartridges commonly supplied by other manufacturers and 10 times more water than string wound filter cartridges, offered with do-it-yourself type watermakers.
3) ECHOTec BHL Series Watermakers are equipped with a unique pH buffer element. This cartridge contains a mixture of minerals that correct pH only enough to reach a neutral equilibrium in order to protect metal fresh water tanks, heaters and fittings. As the water is slightly re-mineralized, this will improve the taste and also makes soap rinse off easily, resulting in up to 50% lower fresh water consumption.
4) 316 stainless control panels vs. painted aluminum panels that easily corrode in contact with stainless gauges and valves (no mix of metals).
5) Custom build stainless steel high pressure pump heads for ultimate corrosion resistance.
6) Custom build stainless steel high pressure fittings for material consistence throughout the system.
7) Custom build leak free O-ring sealed high pressure fittings vs. standard compression fittings.
8) Custom build (one piece) large radius 90 degree high pressure fittings connect directly to hoses and components for low flow restriction and ultimate corrosion resistance vs. multiple NPT adaptors with 90 degree standard elbows.
9) Custom engineered pressure vessels guarantied for life, build with glass fiber reinforced Vinylester and Duplex end plug components. No stainless steel bolts or retaining rings seize or crack in contact with aluminum parts, common with standard GRP vessels built with stainless fasteners directly in aluminum threads.
10) Custom O-ring sealed high pressure ports with threaded Duplex backing plates on all pressure vessels. No cracking plastic endplugs due to over tightened or overloaded NPT high pressure fittings.
11) Premium efficiency high pressure pump motors are epoxy primed and polyurethane top coated vs. single component painted standard motors.
12) All ECHOTec high pressure pump / motor units are anti-vibration mounted with specially engineered soft vibration dampers. This feature dramatically reduces noise transfer into the building.