Options and Accessories - Pro Series Desalination Systems
Semi Automatic Fresh Water Flush – (ECHOTec recommended) – Contact Us For Pricing.
The semi automatic fresh water flush is activated at the touch of a button at a factory set and user adjustable flush duration. Avoids timing and forgetting the manual valve in flush mode.
Product Diverter / TDS Monitor – (ECHOTec recommended) – Contact Us For Pricing.
The automatic product diverter / TDS monitor constantly displays the product salinity on the LCD screen. On start-up, once the product water meets the factory set and user adjustable quality level, the product is diverted to the boats freshwater tank.
A user adjustable delay ensures high quality freshwater, free from any odors independent from the TDS value. The failsafe (never allows unsafe product to enter tank) diverter valve has a manual override option (allows manual testing and tank filling with the standard 3-way valve on the control panel).
Seawater Supply Pump – Contact Us For Pricing.
(drip proof – recommended for Systems PRO-900 – PRO-1800)
The optional centrifugal seawater supply pump is needed where onboard pressurized seawater (20-50 psi) is not available. The powerful magnetic drive, seal-less and corrosion resistant pump is installed below the water line.
It provides up to 30 PSI feed pressure for cost efficient operation of the standard supplied 5 and 20 micron cartridge pre-filtration system. Available for all power options.
For complete redundancy, systems 2600 and 3600 require 2 pumps.
Boost pump – Contact Us For Pricing.
(drip proof – recommended for Systems PRO-500 – PRO-780)
If the high pressure pump is installed less than 2 feet below the waterline, the installation of an optional boost pump is recommended.
3/4″ intake hose barb, 5.8″ outlet hose barb, 4 feet / 1.2 meter 3/4″ wire reinforced intake hose, 10 feet / 3 meter 5/8″ braided feed hose.
Boost pump – Contact Us For Pricing.
(submersible – recommended for Systems PRO-500 – 780)
If the high pressure pump is installed less than 2 feet below the waterline or an additional 5 micron pre-filter is added, the installation of an optional boost pump is recommended.
1 Magnetic (no seal/no leak – ceramic shaft) submersible Boost Pump, 3/4″ intake hose barb, 5/8″ outlet hose barb, 4 feet / 1.2 meter 3/4″ wire reinforced intake hose, 10 feet / 3 meter 5/8″ braided feed hose.
Maintenance Kit – Contact Us For Pricing.
10 Pre-filters, 5 and/or 20 micron (2 ½” x 10”)
1 Spare sea strainer screen
2 Active carbon filters (fresh water flush)
1 Ltr. High-pressure pump
Extended Maintenance Kit – Contact Us For Pricing.
1 Acid cleaning compound
1 Alkaline cleaning compound
2 Storage compounds (Biocide)
1 Complete spare seal and O ring kit (except high pressure pump)
Consumables – Contact Us For Pricing.
5 / 20 micron pre-filter cartridge
5 / 20 micron pre-filter cartridge 10 pcs.
Active carbon cartridge
pH neutralizer / mineral cartridge
Sea strainer screen
Membrane element 2½” x 21″
Membrane element 2½” x 40″
Biocide / Storage compound
Alkaline cleaner
Acid cleaner
High Pressure Pump valve kit
High Pressure pump seal kit (Water and Oil)
Order by phone or e-mail.
Tel: + 868 382 2323 or 868 634 2015
parts@echotecwatermakers.com
Wire transfer or Visa/MasterCard accepted.
