Standard System Features – Belt Driven Watermakers
1 Filter housing 20 microns completely assembled ( w/o boost pump ) or
2 filter housings 5 and 20 microns ( with optional boost pump )
1 316 Bracket with screws.
1 5/8″ Service valve with 1 nylon nipple and 2 barbed hose connectors (with boost pump) or
1 3/4″ flush/storage valve with 1 NylonPressure vessel(s) with reverse osmosis membrane(s) nipple and 3 barbed hose connectors (without boost pump)
1 High pressure pump with 316 SS pump head and magnetic clutch
Pressure vessel(s) with reverse osmosis membrane(s)
500-AML-1 one 40″ vessel
900-AML-2 two 40″ vessels
1200-AML-2 three 40″ vessels
1500-AML-4 four 40″ vessels
1 Duplex stainless steel control panel completely assembled with
1 Duplex stainless steel self regulating pressure control valve
1 High pressure gauge
1 Diverter (3-way) valve
1 Breaker or
2 Breakers with optional boost pump
15 feet / 4.5 meter high pressure hose with 2 x 316 high pressure fittings attached
2 x 316 field attachable high pressure fittings
20 feet / 6 meter 3/8″ blue product water tubing or 1/2″ braided hose (model 1500)
10 feet/3 meter 3/4″ wire coil reinforced intake hose (without boost pump only)
10 feet/3 meter 5/8″ braided hose + 3 feet wire coil reinforced intake hose ( with boost pump)
10 feet/3 meter 1/2″ braided reject hose
2 x 1/2″ 316 hose clamps (model 500, 900, 1200) or
6 x 1/2″ 316 hose clamps (model 1500)
6 x 3/4″ and 2 x 5/8″ 316 hose clamps (with boost pump) or
8 x 3/4″ 316 hose clamps (without boost pump)
1 Handheld TDS Meter
2 Filter cartridges, 20 microns (without boost pump) or 5 and 20 microns (with boost pump)
1 Biocide, 1 acid cleaning solution, 1 alkaline cleaning solution
1 complete Installation and Operating Manual